汽车离合器从动盘扭转耐久试验中弹簧疲劳断裂的自动识别

对汽车离合器从动盘扭转耐久试验中弹簧断裂的自动识别技术进行研究，提出一种以弹簧刚度特性变化为识别特征的识别原理，进行了相关的分析计算；介绍了基于此原理的自动识别方案及测试过程，并给出实际运行结果。此技术提高了测试智能化水平。     

Hub location with flow economies of scale

A characteristic feature of hub and spoke networks is the bundling of flows on the interhub links. This agglomeration of flows leads to reduced travel costs across the interhub links. Current models of hub location do not adequately model the scale economies of flow that accrue due to the agglomeration of flows. This paper shows that current hub location models, by assuming flow-independent costs, not only miscalculate total network cost, but may also erroneously select optimal hub locations and allocations. The model presented in this paper more explicitly models the scale economies that are generated on the interhub links and in doing so provides a more reliable model representation of the reality of hub and spoke networks.     

偏压连拱隧道病害分析及治理措施

基于某高速公路偏压连拱隧道衬砌发生严重破坏和隧道上方发生较大规模的山体开裂等病害,采用地震CT手段对隧道周围的工程地质进行了探测;根据现场监测数据,分析了隧道支护结构的受力状态及其安全性;对复杂地质条件下两种典型的施工方案进行了动态施工的数值模拟,对比分析了不同施工方案对围岩稳定和衬砌受力的影响;探讨了衬砌发生严重破坏的原因,并提出了相应的治理措施。研究结果表明:连拱隧道内侧断裂带、上方松散层等不良地质条件和不合理的施工方案是导致隧道衬砌严重破坏和山体地表开裂的主要原因。研究结果为分析和治理偏压连拱隧道病害提供了依据。     

基于实测数据评估交通事件检测中神经网络应用性的研究

神经网络为交通事件自动检测技术摆脱传统方法探测率低、误报率高的状况提供了新的解决思路。在以往局限于仿真数据研究的基础上,本文利用I-880数据库实测交通事件数据对神经网络在交通事件自动检测中的实际应用进行了研究,结果表明:神经网络应用于交通事件自动检测技术中,具有较高的探测率和较低的误报率,但该算法可移植性较差,在实际应用中要予以考虑。     

基于视觉的前方车辆探测技术研究方法综述

对国内外关于车道上本车前方车辆检测方法进行了综述。根据探测车辆所采用的传感器不同,分别对采用单目视觉、双目视觉、视觉与其他传感器融合以及非视觉传感器的几种探测方法进行了比较与分析。同时,针对每种探测方法,进一步阐述了目前车辆识别的一些具体算法。最后,指出了每种方法存在的优点和一些不足。     

灌注混凝土桩施工方法及工艺的探讨

通过对钻孔灌注桩与沉入桩的对比分析,得出了钻孔灌注桩的优点,并且详细介绍了钻孔灌注桩的施工工艺和方法,总结了提高灌注混凝土桩承载力的方法和灌注桩的检测手段及一般事故处理方法,以供今后类似工程实践参考.     

基于朴素贝叶斯算法的船舶异常行为监测

随着海事事故与海上违法行为的不断增多,智能的监控方法成为降低海事事故,打击海上违法行为的有效手段.同时,船舶自动识别系统(Automatic Identification System,AIS)的普及及船舶交通管理系统(Vessel Traffic Service,VTS)的扩建,又为智能监控提供了数据支持.鉴于此,利用船舶自动识别系统提供的数据,分析通航水域船舶信息的分布情况,根据其概率分布采用朴素贝叶斯算法,从船舶航速、航向及距航道边界距离3个方面,构建船舶异常行为检测模型.最后,以成山角通航水域为例,检验模型的有效性.实验结果表明,构建的模型能够有效地完成异常行为监测,减少海事监管人员的工作强度,同时根据实验结果分析了成山角水域船舶航行的特点,并对成山角定线制提出合理化建议.     

大直径盾构管片水平拼装试验方法探究

大直径盾构管片水平拼装试验存在效率低下甚至失败的情况,不能真实全面反映产品尺寸精度。分析其原因除大直径管片体积大、重量大的因素外,主要原因在于现有的试验设备工装简陋、试验方法粗放、规范要求低等。结合当前水平拼装的规范要求,分析现有试验方法存在的不足,对现有拼装设备工装进行改造,制定高标准的、更加严格的工艺措施,创造性地提出在每层管片拼装时增加标高检测的新思路。将新方法应用于南京长江第五大桥夹江隧道工程管片水平拼装试验,结果良好,证明了此试验方法的科学性与有效性。     

Who you are is how you travel: A framework for transportation mode detection using individual and environmental characteristics

With the increasing prevalence of geo-enabled mobile phone applications, researchers can collect mobility data at a relatively high spatial and temporal resolution. Such data, however, lack semantic information such as the interaction of individuals with the transportation modes available. On the other hand, traditional mobility surveys provide detailed snapshots of the relation between socio-demographic characteristics and choice of transportation modes. Transportation mode detection is currently approached using features such as speed, acceleration and direction either on their own or in combination with GIS data. Combining such information with socio-demographic characteristics of travellers has the potential of offering a richer modelling framework that could facilitate better transportation mode detection using variables such as age and disability. In this paper, we explore the possibility to include both elements of the environment and individual characteristics of travellers in the task of transportation mode detection. Using dynamic Bayesian Networks, we model the transition matrix to account for such auxiliary data by using an informative Dirichlet prior constructed using data from traditional mobility surveys. Results have shown that it is possible to achieve comparable accuracy with the most widely used classification algorithms while having a rich modelling framework, even in the case of sparse mobility data.     

Locating emergency vehicles with an approximate queuing model and a meta-heuristic solution approach

In this paper, the location of emergency service (ES) vehicles is studied on fully connected networks. Queuing theory is utilized to obtain the performance metrics of the system. An approximate queuing model the (AQM) is proposed. For the AQM, different service rate formulations are constructed. These formulations are tested with a simulation study for different approximation levels. A mathematical model is proposed to minimize the mean response time of ES systems based on AQM. In the model, multiple vehicles are allowed at a single location. The objective function of the model has no closed form expression. A genetic algorithm is constructed to solve the model. With the help of the genetic algorithm, the effect of assigning multiple vehicles on the mean response time is reported.